OEM/ODM Supplier Flood Defense Products - Surface installation type light duty automatic flood barrier Hm4d-0006D – JunLi

Short Description:

Product Detail

FAQ

Product Tags

Feedback (2)

Often customer-oriented, and it's our ultimate target to become not only probably the most reputable, trustable and honest provider, but also the partner for our customers for Entryway Floodgate , Inflated Flood Barrier , Automatic Flood Door For Subway, Our products are regularly supplied to many Groups and lots of Factories. Meanwhile, our products are sold to the USA, Italy, Singapore, Malaysia, Russia, Poland, and the Middle East.

OEM/ODM Supplier Flood Defense Products - Surface installation type light duty automatic flood barrier Hm4d-0006D – JunLi Detail:

Model	water retaining height	Installation mode	longitudinal width	bearing capacity
Hm4d-0006D	620	surface mounted	1200	(pedestrian only) light duty

Grade	Mark	Bearing capacity (KN)	Applicable occasions
Light	D	7.5	shopping malls, residential pedestrian or non motor vehicle entrances and exits and other areas where motor vehicles are prohibited.

Maintenance and regular checking of the automatic flood barrier

3 check and maintain the equipment at least once every three months according to the following contents:

1) The bottom frame and the ground shall be fixed firmly without obvious looseness; the inclined edge of the end water stop rubber soft plate and the side wall shall be fixed firmly without obvious looseness.

2)The Yellow protective shell and buoyancy layer at the lower part of the door leaf shall be free from obvious falling off, corrosion, powder generation, deformation, crack and damage.

3)The door leaf and its root hinge, bottom frame, water inlet and stainless steel batten shall be free of obvious warpage, deformation, rust, crack and damage.

4) All rubber or silica gel parts shall be free from aging, cracking, deformation and damage.

5)All connecting and welding parts shall be fastened without looseness, crack and obvious damage; all rivets and bolts shall be fastened without looseness.

4. Every two years, conduct a comprehensive inspection on the firmness of the fixing between the bottom frame and the ground at least: remove the rear and front slope or the cover plate of the bottom frame, and the connecting piece and its welding point fixed between the bottom frame and the ground shall be free of obvious rust, deformation, crack and damage; the expansion bolt or steel nail shall be free of obvious looseness and corrosion. In case of any problem found during the inspection and maintenance by the user, it shall be handled in a timely manner if it can be handled, and if it can not be handled, it shall be notified to the manufacturer in a timely manner to arrange professional personnel for handling. The user shall be responsible for the consequences caused by failure to notify in time. The company follows the principle of continuous improvement and improvement of products, and reserves the right of technical change without notice.

Automatic self-closing flood barrier

Product detail pictures:

Related Product Guide:

We now have our individual sales group, layout team, technical team, QC crew and package group. Now we have strict high-quality control procedures for each procedure. Also, all of our workers are experienced in printing discipline for OEM/ODM Supplier Flood Defense Products - Surface installation type light duty automatic flood barrier Hm4d-0006D – JunLi, The product will supply to all over the world, such as: Kenya , Uruguay , Rome , Our staffs are rich in experience and trained strictly, with professional knowledge, with energy and always respect their customers as the No. 1, and promise to do their best to provide the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we will develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.

The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.

By Polly from Costa Rica - 2017.08.15 12:36

Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.

By Christopher Mabey from Kuwait - 2017.05.02 18:28