China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi

China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi Featured Image
  • China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi
  • China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi
  • China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi

Short Description:


Download as PDF

Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

Our personnel are always inside the spirit of continuous improvement and excellence, and together with the outstanding excellent goods, favorable price and good after-sales services, we try to gain every customer's trust for Hydrodynamic Flood Barrier For Metro , Flood Dam Gate , Anti Flood Gate , Our firm is dedicated to giving shoppers with significant and steady high quality goods at aggressive price tag, generating every single customer satisfied with our products and services.
China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi Detail:

Model water retaining height installation mode installation groove section bearing capacity
Hm4e-0012C  1150 embedded installation width1540 * depth: 105  heavy duty (small and medium-sized motor vehicles, pedestrian)

 

Grade Mark Bearing capacity (KN) Applicable occasions
Heavy duty C 125 underground parking lot, car parking lot, residential quarter, back street lane and other areas where only allow non-fast driving zone for small and medium-sized motor vehicles (≤ 20km / h).

Embedded Installation of automatic flood barrier

(1) Embedded installation slot position:

a) It should be set behind the outermost intercepting ditch. Reasons: small water can be discharged through the intercepting ditch; when flood occurs, the municipal pipeline will be backfilled from the intercepting ditch when the water is full.

b) The higher the installation position, the higher the water retaining level.

(2) Discharge capacity of residual water in the installation tank:

a) A 50 * 150 water collecting tank is reserved at the bottom of the installation slot, and a Φ 100 drainage pipe is reserved at the bottom of the water collecting tank.

b) Discharge test: after pouring some water, the water can be discharged smoothly from the drain pipe.

(3) The levelness of the installation surface:

The installation surface horizontal height difference of the two sides should be ≤ 30mm (measured by laser level meter)

(4) The flatness of the installation surface:

According to the quality acceptance code of construction ground engineering GB 50209-2010, the surface flatness deviation should be ≤2mm ( applied 2m guiding ruler and wedge feeler gauge). Otherwise, the ground should be leveled first, or the bottom framework will leak after installation.

(5) Installation surface strength

a) The installation surface is made of at least C20 concrete with thickness ≥Y and the surrounding horizontal extension X ≥300mm or using equivalent strength of installation surface.

b) The installation surface should be free of cracks, hollowing, falling off , etc. The concrete should be qualified for the quality acceptance code of concrete structure engineering GB50204-2015, otherwise, need remade concrete installation surface according to the requirement.

c) In case of concrete, it should beyond curing period.

(6) Side walls

a) Side wall height should be higher than the flood barrier, otherwise it should be created.

b) The side walls should be made of solid brick or concrete or equivalent installation surface. If the wall is of metal or nonmetal material, relevant reinforcement should be applied.

1 (1)

How the hydrodynamic automatic flood barrier retain water

3

Product detail pictures:

China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi detail pictures

China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi detail pictures

China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi detail pictures

Related Product Guide:
That has a sound small business credit, great after-sales service and modern production facilities, we've earned an outstanding standing amid our buyers across the earth for China Factory for Flood Water Barriers - Embedded flood barrier Hm4e-0012C – JunLi, The product will supply to all over the world, such as: Cairo , Austria , Grenada , Strong infrastructure is the need of any organization. We are backed with a robust infrastructural facility that enables us to manufacture, store, quality check and dispatch our products worldwide. To maintain smooth work flow, we have sectioned our infrastructure into a number of departments. All these departments are functional with latest tools, modernized machines and equipment. Owing to which, we are able to accomplish voluminous production without compromising upon the quality.

The supplier abide the theory of quality the basic, trust the first and management the advanced so that they can ensure a reliable product quality and stable customers.
5 Stars By Faithe from UAE - 2018.03.03 13:09
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
5 Stars By Hedda from Myanmar - 2017.07.28 15:46

RELATED PRODUCTS